5 Replacement Belts for Kenmore Quick Clean Vacuum Cleaners

• Model Number: 116.35725400

• Part Number(s): 4369591 or UB-1.  Replaces KC28SCZPZ000, 20-5240 and 20-5275.

How to maintain your vacuum:

If you want your vacuum cleaner to last years instead of months you MUST perform these easy-to-do steps that are very simple if performed frequently enough. 

WHY do vacuum belts NEED to be changed if they are not broken? 

Your vacuum cleaner belt is the least expensive but yet most valuable part on your vacuum. Vacuum cleaner belts should be replaced at least twice a year. Why, you ask.  It is hard to get a new vacuum belt on because it is much shorter than the old belt. Every day your belt looses elasticity (think of a 2 inch rubber band that you stretch to 4 inches and leave it that way for a few months) Even if your vacuum has never been turned on the belt is stretching and loosing elasticity as you read this. Every single day it doesn't work quite as well as the day before. It will still pick up hair and light dust but can't agitate the heavy sand and gritty soils to the surface of the carpet fibers to be sucked out. After 6 months the brush-roll starts to slow down. It may even stop spinning completely when the vacuum cleaner nozzle is lowered onto the carpet.

To work properly your vacuum cleaner must pull a large volume of air into the vacuum, filter and trap the dirt from the airflow and then exhaust the air back into your home. 

Disclaimer:

The part you order may look different than the part in the picture, please call us toll free at 260 244-4696 if you have any questions.