Three (3) New Replacement Belts to Fit NON-Self propelled Hoover Hilite Volta upright vacuum cleaners using belt number 38528040

High quality aftermarket replaces Part Numbers: 38528040 and 38528027.
These belts will NOT fit the "T" Style or self-propelled Vacuums.

If you are unsure if this part will fit your vacuum call us toll free with your model number at 877-656-4861.

Change your Vacuum Belts every 6-12 months for best performance. Belts must be stretched to install and lose elasticity.

 Before installing the new belt make sure the end caps will turn freely. Hair, dust, etc can build up under the end caps causing it to not turn freely. Be sure to clean the hair and lint from around the end caps of the brush roll or it may break your new belt or damage the brush roll or the vacuum cleaner nozzle housing. After installing the bottom plate make sure the brush roll will turn before you plug the vacuum in and turn it on. If the bottom plate is pinching the belt it may damage the new belt you just installed.